Measure, Cut, and Install Stair Treads — Measure and Cut Stair Treads

Beginner2 mins

Part of project

How to Replace Wall-To-Wall Stair Carpet with Removable Treads · Step 3 of 6

Helpful?

In this video

After all risers are securely in place, use the same stair templating device to measure the dimensions for each stair tread. Take precise measurements of the depth and width, accounting for any slight variations in each step. Transfer these measurements to your new hardwood stair tread material (e.g., oak). Use a track saw or miter saw to carefully cut each tread to size. Dry-fit each tread to ensure it sits perfectly flush with the riser below and fits snugly between the stringers. Apply a generous bead of construction adhesive to the top of the stair stringers and along the top edge of the riser below where the tread will sit. Then, place the cut tread firmly into position and secure it with 16-gauge nails along the back edge and sides, driving them into the stringers and riser.

2.1K views60

Transcript

Hide

to get all of your Riser measurements install all of your risers onto the stairs first then use that same templating device to get the measurements for your Treads cut those down to size glue the spots underneath the Treads and install with the glue and 16 gauge nails use three quarter inch oak flooring for your Landings

Auto-generated transcript. May contain errors.

Measure, Cut, and Install Stair Treads — Measure and Cut Stair Treads

Advanced

2 days

Part of project

How to Replace Wall-To-Wall Stair Carpet with Removable Treads · Step 3 of 6

Was this clip helpful?

In this video

After all risers are securely in place, use the same stair templating device to measure the dimensions for each stair tread. Take precise measurements of the depth and width, accounting for any slight variations in each step. Transfer these measurements to your new hardwood stair tread material (e.g., oak). Use a track saw or miter saw to carefully cut each tread to size. Dry-fit each tread to ensure it sits perfectly flush with the riser below and fits snugly between the stringers. Apply a generous bead of construction adhesive to the top of the stair stringers and along the top edge of the riser below where the tread will sit. Then, place the cut tread firmly into position and secure it with 16-gauge nails along the back edge and sides, driving them into the stringers and riser.

2.1K views60

Video Transcript

(322 characters)

Hide

to get all of your Riser measurements install all of your risers onto the stairs first then use that same templating device to get the measurements for your Treads cut those down to size glue the spots underneath the Treads and install with the glue and 16 gauge nails use three quarter inch oak flooring for your Landings

Transcript may be auto-generated and contain errors.