Skip to main content

Attach Box Bottom — Attach the Bottom

Beginner4 hours

Part of project

How to Build a Simple Wooden Box Step · Step 3 of 6

Helpful?

In this video

Apply a generous amount of wood glue along the bottom edges of the assembled box sides. Carefully place the cut plywood bottom piece onto the glue, aligning it precisely with the sides. Use clamps to hold the bottom in place while the glue sets. For added security and to allow for quicker work, drive small finishing nails or brads through the bottom piece into the side panels. Wipe away any excess glue with a damp cloth.

89.2K views3.3K
Make Something

944K subscribers

View Channel

FAQs

Which tools are absolutely essential for a beginner, and are multiple hammers necessary for this project?

For a simple box, a measuring tape, pencil, miter saw (or hand saw with miter box), square, sandpaper, and a single hammer are essential. The specialized drywall hammer and hinge bit are useful if you're installing a hinged lid, but not strictly required for the basic box structure itself.

Why is pine wood recommended for this project, and can I use other types of wood?

Pine is a great choice for beginners due to its affordability, widespread availability, and ease of cutting and sanding. You can certainly use other woods like poplar or plywood for different aesthetics or increased durability; just be aware they might be harder to work with or more expensive.

What are the most important safety precautions I should take when cutting and assembling the box?

Always wear eye and ear protection when using a miter saw or other power tools. Ensure your workpiece is securely clamped before making cuts, and keep hands clear of the blade. When assembling, be mindful of hammer swings and pre-drill pilot holes to prevent wood splitting.

What are common mistakes beginners make building a wooden box, and how can I avoid them?

Common mistakes include inaccurate measurements leading to uneven cuts, and rushing assembly resulting in a crooked box. Always 'measure twice, cut once,' use a speed square to mark precise lines, and dry-fit your pieces before final assembly to check for fit.

Transcript
Hide

going back to the straight edge that worked pretty good it's I mean it's slightly too big but I'm just going to sand that down smooth so with the nails in there you can actually take the clamps off and move on to the next step for the lid it's gonna be basically just like the bottom this

Auto-generated transcript. May contain errors.