Skip to main content

Retract Cable and Flush Drain — Retract the Drain Snake

Beginner3 hours

Part of project

Drain Snaking · Step 5 of 7

Helpful?

In this video

After the blockage has been cleared, retract the cable from the drain. To do this, squeeze the auto-feed trigger and turn the drum handle in the counter-clockwise direction. Once the cable is fully retracted, run hot water down the drain for a few minutes to flush out any remaining debris and to help clean the snake's cable.

1.7K views24

FAQs

What type of drain snake is best for a common household clog, and do I need any other special tools?

For most household clogs in sinks or tubs, a 25-foot drum auger, like 'The Plumber's Choice 25 ft. Drum Auger Steel Plumbing Drain Snake,' is ideal. In addition to the snake, you'll primarily need basic tools such as a screwdriver and pliers to remove drain covers or stoppers.

What are the most important safety precautions to take before and during drain snaking?

Always wear gloves and eye protection to shield yourself from dirty water and debris. Place a drop cloth or rags around the work area to protect your floor from spills and potential damage. Never mix drain snaking with chemical drain cleaners, as this can create dangerous fumes or corrosive splashes.

How difficult is drain snaking for a beginner, and how long should I expect the project to take?

Drain snaking is generally considered a beginner-friendly DIY project that requires patience more than specialized skills. While the estimated time is 3 hours, a typical first-time attempt might take longer. Take your time to avoid damaging pipes.

What should I do if the drain snake gets stuck or if I can't seem to clear the clog?

If the snake gets stuck, try rotating it counter-clockwise while gently pulling back to free it without excessive force. If you've made multiple attempts and still can't clear the clog, or if the snake remains firmly stuck, it's best to stop and call a licensed plumber to prevent potential pipe damage.

Transcript
Hide

Work cable back and forth two to three times. Once the blockage has been cleaned, retract the cable by turning the drum in the counterclockwise direction. After flow is established, if possible, run water to clear debris and clean the cable.

Auto-generated transcript. May contain errors.