Apply the Wall Patch — Apply Drywall Patch
Part of project
Drywall Patch · Step 2 of 9
In this video
Now, proceed with applying the self-adhesive patch. If necessary, use a pair of scissors to cut the self-adhesive wall patch to an appropriate size. The patch should be large enough to completely cover the hole with an overlap. Position the patch directly over the hole on the wall, ensuring there's an overlap of at least 3 centimeters (approximately 1.2 inches) between the edge of the hole and the edge of the patch. Remove the protective backing from the patch and firmly press it down onto the wall, paying special attention to the edges to ensure good adhesion.
435K subscribers
Apply the Wall Patch — Apply Drywall Patch
Part of project
Drywall Patch · Step 2 of 9
In this video
Now, proceed with applying the self-adhesive patch. If necessary, use a pair of scissors to cut the self-adhesive wall patch to an appropriate size. The patch should be large enough to completely cover the hole with an overlap. Position the patch directly over the hole on the wall, ensuring there's an overlap of at least 3 centimeters (approximately 1.2 inches) between the edge of the hole and the edge of the patch. Remove the protective backing from the patch and firmly press it down onto the wall, paying special attention to the edges to ensure good adhesion.