Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 4 · Drill Pilot Holes

Select a drill bit that is slightly smaller than the diameter of the mounting screws. Carefully drill pilot holes at each of the marked points on the wall. Ensure the drill is held perpendicular to the wall to create straight holes. For installations into blocking, ensure the pilot hole is deep enough to accept the full screw length.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Drill Pilot Holes

Select a drill bit that is slightly smaller than the diameter of the mounting screws. Carefully drill pilot holes at each of the marked points on the wall. Ensure the drill is held perpendicular to the wall to create straight holes. For installations into blocking, ensure the pilot hole is deep enough to accept the full screw length.

Videos for this step

Drill Pilot Holes into StudsDrill Pilot HolesDrill Pilot Holes

Tools and Materials

← Project

How to Install a Grab Bar at the Top or Bottom of Stairs

Step 4 of 6·50 min left

Determine Grab Bar Location
15 minutes3 items
Verify Wall Structure
20 minutes4 items
Mark Mounting Holes
10 minutes3 items
4
Drill Pilot Holes
15 minutes3 items
5
Mount the Grab Bar
25 minutes4 items
6
Test Stability
10 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.