Step 2 · Cut the Copper Pipe

Measure and mark the desired length on the copper pipe. Position the tubing cutter on the mark, with the cutting wheel aligned perfectly. Tighten the knob on the cutter just until the wheel makes firm contact with the pipe. Rotate the cutter around the pipe, tightening the knob slightly (about a quarter turn) after each full rotation. Continue this process until the pipe snaps off cleanly. This method ensures a square cut, which is essential for a good fit inside the fitting.

Tools and Materials

RIDGID 3/16 in. to 15/16 in. 104 Close Quarters Copper, Aluminum, Brass, and Plastic Tubing Cutter, Multi-Use Tubing Tool 32985RYOBI Black Fine Point Permanent Workshop Marker RPM121Cerro 1/2 in. x 5 ft. Copper Type L Hard Straight Pipe PSLE-500L005Safety Glasses