Step 10 · Grout and Seal

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the tile spacers. Mix your grout according to the package directions. Apply the grout diagonally across the tile joints using a grout float, pressing it firmly into the gaps. After about 15-30 minutes, use a damp grout sponge to wipe the excess grout off the tile surface. Let the grout cure for the manufacturer-recommended time (typically 24-72 hours). Once cured, apply a grout sealer to the new grout lines to protect them from moisture and staining. Finally, apply a bead of 100% silicone caulk around the perimeter of the new escutcheon plate where it will meet the tile.