Step 5 · Reinstall the Toilet
First, and most importantly, REMOVE THE RAG from the drain pipe. Insert the new closet bolts into the slots on the new flange, sliding them into position (typically at the 3 o'clock and 9 o'clock positions). Place the new wax ring on the flange, centered over the opening, or press it firmly onto the circular outlet horn on the bottom of the toilet. With your helper, carefully lift the toilet and lower it straight down over the flange, aligning the closet bolts through the holes in the toilet's base. Press down firmly on the toilet bowl to compress the wax ring and create a seal. Place the plastic washers and metal washers onto the bolts, followed by the nuts. Tighten the nuts by hand, then use a wrench to tighten them alternately, a half-turn at a time, until the toilet is snug and stable on the floor. Do not overtighten. Reconnect the water supply line to the tank.