Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 1 · Cut Wood Components

Using a miter saw or hand saw, carefully cut the 1x3 lumber into the following pieces: four pieces at 24 inches for the legs, two pieces at 18 inches for the top side rails, and four pieces at 15 inches for the support slats.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Cut Wood Components

Using a miter saw or hand saw, carefully cut the 1x3 lumber into the following pieces: four pieces at 24 inches for the legs, two pieces at 18 inches for the top side rails, and four pieces at 15 inches for the support slats.

Videos for this step

Cut Lumber PiecesPrepare and Cut LumberCut All Lumber Pieces to Length

Tools and Materials

← Project

DIY Luggage Rack

Step 1 of 5·4.9 hr left

1
Cut Wood Components
30 minutes5 items
2
Sand Wood Components
45 minutes3 items
3
Assemble Leg Frames
40 minutes5 items
4
Attach Support Slats
60 minutes6 items
5
Apply Finish
120 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.