Cut Lumber Pieces — Cut Wood Components

Beginner8 hours

Part of project

DIY Luggage Rack · Step 1 of 5

Helpful?

In this video

Cut all the lumber pieces according to the provided cut list. The pieces include: two 1x8s @ 33" (side panels), one 1x2 @ 36" (top support), eight 1x4s @ 13" (end panel slats), four 1x3s @ 16-1/4" (corner pieces), four 1x2s @ 16-1/4" (corner pieces), and eight 1x4s @ 33" (side panel slats). The project panel should be 15-1/4" x 36" (ripped from a 1x16 if necessary). Use a miter saw for most cuts and a circular saw with a Kreg Rip-Cut guide for ripping the project panel.

16.3K views758

FAQs

Is this DIY luggage rack project truly beginner-friendly, and is 8 hours a realistic estimate?

Yes, this project is designed for beginners, focusing on basic cutting, sanding, and assembly techniques. The 8-hour estimate is achievable if you have all your tools and materials ready and work efficiently. Taking your time with measurements and cuts is key to avoiding mistakes that could extend the project duration.

What are the essential woodworking tools I actually need for this project, beyond the ones listed?

For accurate woodworking, a hand saw or miter saw is crucial for making precise cuts, which wasn't explicitly mentioned but implied. You'll definitely need a measuring tape, pencil, speed square, drill, and clamps for assembly. Safety glasses and sandpaper are also essential for safety and finishing.

What type of wood is best for a sturdy luggage rack, and what should I budget for materials?

Pine, poplar, or common board are excellent, affordable choices for this project due to their workability and availability. The overall cost for wood, screws, and sandpaper typically ranges from $30-$70, depending on the wood species and current prices. It's always wise to buy a little extra material to account for any miscuts.

What are the most important safety precautions I should take while building this luggage rack?

Always wear safety glasses when cutting or drilling to protect your eyes from flying debris. Use gloves to prevent splinters during handling and sanding the wood. Ensure your work area is clear, well-lit, and always clamp wood securely before cutting or drilling to prevent kickbacks or slippage.

Transcript

Hide

make it a lot easier here are all the cuts that were needed for this project now all of this again is included down below and overall these were pretty easy cuts i could definitely do it but alex hopped in to help me because we wanted to build together because it was the first thing that we were making for finn we used our ryobi miter saw and we've had this for a long long long time and this actually happened to be the project that got retired on so we purchased a brand new ryobi we have a good amount of ryobi tools already so we bought our new miter saw with the ryobi brand to cut the 1x8 because we don't have the stretch arm on the saw alex had to use the hand saw to do that and the good news is our new saw has that capability but he went through and measured that and just used another saw to get that cut like i mentioned alex did have to rip off three quarters of an inch from the width just so it fit with the plans if you have a project panel this size you can adjust the measurements we just wanted to follow the plants pretty closely alex used this attachment for the saw made by craig and he really really likes it so i will link it down below if you ever have longer cuts that you need to make with a handheld saw like that

Auto-generated transcript. May contain errors.