Skip to main content
Stesso
BrowseMy ProjectsBlog
Log inSign up
Stesso

Step 1 · Shut Off the Water Supply

Before starting, completely shut off the water supply to your shower. Locate the shut-off valves—usually behind an access panel or near the water heater—and turn them clockwise until they stop. Double-check that the water is off by attempting to run water from a nearby faucet.

Stesso
BrowseMy Projects
Sign in

Step 1 · Shut Off the Water Supply

Before starting, completely shut off the water supply to your shower. Locate the shut-off valves—usually behind an access panel or near the water heater—and turn them clockwise until they stop. Double-check that the water is off by attempting to run water from a nearby faucet.

← Project

Delta Shower Handle Replacement: A Step-by-Step DIY Guide

Step 1 of 4·30 min left

1
Shut Off the Water Supply
5 minsBeginner
2
Remove the Old Delta Shower Handle
10 mins2 itemsIntermediate
3
Install the New Delta Shower Handle
10 mins1 itemsIntermediate
4
Check for Leaks and Restore Water Flow
5 minsBeginner
Prev
Next