Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 2 · Cut Out Existing Wall Material

Using a drywall saw or a reciprocating saw equipped with a fine-tooth blade, carefully cut through the wall material along the pencil lines previously marked for the door opening. Make precise cuts to avoid overcutting or damaging surrounding wall areas. If the wall is plaster or contains materials other than drywall, use the appropriate saw blade for a clean cut.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Cut Out Existing Wall Material

Using a drywall saw or a reciprocating saw equipped with a fine-tooth blade, carefully cut through the wall material along the pencil lines previously marked for the door opening. Make precise cuts to avoid overcutting or damaging surrounding wall areas. If the wall is plaster or contains materials other than drywall, use the appropriate saw blade for a clean cut.

Videos for this step

Cut and Remove Drywall for OpeningMark and Cut Rough OpeningCut Drywall Opening

Tools and Materials

← Project

How to Add a Door to an Under-Stair Closet

Step 2 of 6·6.5 hr left

Locate Studs and Mark Opening
30 minutes4 items
2
Cut Out Existing Wall Material
45 minutes4 items
3
Frame the Door Opening
90 minutes6 items
4
Install Door Jamb and Door
75 minutes5 items
5
Install Door Casing and Trim
60 minutes6 items
6
Install Door Hardware and Finish
120 minutes7 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.