Wish we had that 20 years ago. #repair #construction #diy #shorts

You want to take a break? Submerging in the water. I may have too much water. I'm going to apply the Fix All and break this underwater. I'm going to make a mess here. So, I'm going to press them together. Even though I make a mess, that's okay. All you need is Fix All. Tell me about this while we're doing this demo, will you? This is a our hybrid polymer sealant adhesive called Fix All. Okay. And what I'm doing, I'm applying it under this water. So, if you are up on a roof and it starts raining, instead of using a standard silicone, where you would have to stop, you can apply this, the Fix All, in a in a wet condition. There we go. Consistency is there. So, what I'm going to do, I'm going to cut into this cup. Like so. And that's sealing just as well. Now, we'll make a little bit more uh put the a little bit more stress on the product. I'm going to make another cut. And right down here, I'm going to flap it over. Again, that's sealing. There's no no leaks. No runs, no errors, as Johnny Bench used to say. That's sealing just as well. So, that fast, as soon as it comes out of the gun, it's sealing. >> Yes. Soudal. Okay. soudalusa.com And what's the working time on this? Uh cure time 24 hours, fully cured. Fully cured. And it will support 450 lb per square inch. So, you're up on a roof in the rain trying to fix it, and no problem. No problem. You can apply it, collect your money, go to the next job. Thank you, sir. You're welcome.