Skip to main content
Stesso

Install Pull Box and Route to Charger

0:59
1:36
24.8K views

At 0:59 in

Why Installing EV Chargers are Easy Money.. why you should become an Electrician #hendythesparky

Watch on YouTube

What happens here

At the charger installation location (e.g., in the garage), install a pull box where the Romex wire emerges from the wall or crawl space. This box provides an accessible point for making connections and ensuring proper wire termination. The video specifies the use of a two-conductor and one-ground wire configuration. Ensure the box is properly grounded according to electrical codes. Route the wire from this pull box up to the Tesla Wall Connector, which is mounted on the wall.

Goal: Connect the main wire run to the charger via a properly grounded pull box.

Tools and materials

  • Pull Box — To provide an accessible junction point for wiring coming from the crawl space
  • Screwdriver Set — To connect wires to terminals
  • Wire Strippers — To remove insulation from wire ends for connections

What they say

Hide

under the deck. Come over here. You can't really see, but it's dark in there. and ran a wire through all the way through that crawl space to the garage. We came from the crawl space out to here. The customer had some shelving here. So, we were able to peer out, come out here, had a pull box, two conductors, one ground. And we just grounded the box and we continued our wire all the way up to the charger. This is a hardwired connection. We always recommend for all our chargers to

Auto-generated from the video audio.