Skip to main content
Stesso

Connect Grounding and Verify Conduit

0:07
0:23
77K views

At 0:07 in

What would you Rate this Install, 200 AMP Residential Meter Socket, Thoughts?

Watch on YouTube

What happens here

Once the service entrance conductors and neutral are secured, attention is directed to the grounding system and conduit integrity. The video points to the grounding electrode conductor (which may be bare copper or green insulated wire) connected to the grounding bar within the meter socket. This grounding bar is typically bonded to the neutral bar inside the socket. The video also highlights the proper installation of the conduit entering the bottom of the meter socket, specifically pointing out a 'female coupling'. This coupling or conduit hub ensures a secure, protective entry point for the conductors, preventing abrasion and maintaining the enclosure's environmental seal.

Goal: Establish a proper grounding connection and confirm secure conduit entry for conductor protection.

Tools and materials

  • Conduit — Protecting the service entrance conductors as they enter the meter socket enclosure
  • Female Coupling — Securing the conduit to the meter socket and providing a smooth, protective entry point for wires
  • Grounding Electrode Conductor — Connecting the electrical system to the earth for fault protection and stability
  • Insulated Lineman's Pliers — Tightening the lug connection for the grounding conductor

What they say

Hide

Looky looky looky. >> Get in the meter socket. I need to make sure it's tight. That's good. >> Where's your torque wrench? >> Got it. >> Where's your torque wrench? Let's go. Let's give it a little bit of an approval here. I love this idea. That worked great. That female coupling in that. Nice job, Chris. Okay. Um that's it.

Auto-generated from the video audio.