Skip to main content
Stesso

Introduction and Initial Plan

0:43
23:56
31.9K views

At 0:43 in

We Went a Little Too Hard.. Tearing Down LSXcalade's 427 To Find The Problem (Cutting it Close)

Watch on YouTube

What happens here

The project begins with the presenter stating the objective: to perform a teardown on his Cadillac Escalade's engine to remove the bad cylinder head due to a blown head gasket. He mentions the tight timeline as he needs to get the vehicle ready for a trip. The engine bay is shown with an orange intake manifold and turbo components. He plans to move the vehicle to a different spot in the garage to avoid interference with the dynamometer and then proceed with the disassembly. The plan includes removing the wheels, downpipes, and headers before tackling the intake manifold.

Goal: Understand the project objective and initial steps for engine disassembly.

Tools and materials

  • Cadillac Escalade Cadillac — The vehicle undergoing engine repair
  • Dynamometer — Mentioned as an obstacle to be avoided during disassembly; not directly used in this step

What they say

Hide

today I'm starting to tear down on this my my goal is I need to get the bad head off tonight because we don't have much time before we have to get it back together and be able to hit the road to Florida next week we got to make a couple stops along the way so there's really only a couple days to do this Adrian had to go back to Memphis to get some stuff so he's not here right now he will be maybe tomorrow night I think he's going to come back tomorrow night but for me right now I'm solo and I got to tear this thing apart I have never taken the heads off this motor I have never touched this motor uh a guy named Mark Vincent built it back in Pittsburgh he builds all Jeff Lutz's Motors he put this thing together in from between like a April to June of 2018 haven't touched it since then since the first time this thing got laid in there I have not touched the head bolts not touched the intake manifold Valley cover heck even that that header driver side header hasn't come off since 2018 so this is going to be a little bit of a learning experience for me cuz I haven't really messed with any of this stuff I haven't even I haven't even touched the Rockers like I don't know where the bolts are to get them off I mean I'll figure it out but I'm just saying I've personally never done it before so you can into my own motor is this is going to be a new sight for me which is kind of cool so first I got to move this thing over a little bit so I'm not right next to the dyno while I'm tearing it apart but then we're going to have to

Auto-generated from the video audio.