Skip to main content
Stesso

Install New Stem Assembly and Finalize

1:04
1:16
5.8K views

At 1:04 in

Water Won’t Come Out! 💦 #plumbing #plumber #diy

Watch on YouTube

What happens here

Carefully insert the newly lubricated stem assembly into the existing Woodford Brass hose bib body. Rotate it gently to ensure it seats correctly and thread it into place. Use an adjustable wrench to securely tighten the stem assembly into the hose bib body. Test the handle for proper opening and closing. The video notes that replacing only the internal stem is preferable in situations where the surrounding wall, such as freshly finished drywall, would be damaged by a full hose bib replacement, avoiding the need for fresh holes and additional repairs.

Goal: Restore full functionality to the hose bib without replacing the entire unit.

Tools and materials

  • Adjustable Wrench — Tightening the stem assembly into the hose bib body
  • Existing Hose Bib Body Woodford Brass — The housing for the new stem assembly

What they say

Hide

rubber parts. This is going to ensure that your O-rings and your rubber washers and everything are going to last a bit longer. And then install the new assembly into the existing hose bib. Yes, I could have just replaced the hose bib, but the drywall had just got done and they didn't want fresh holes cut in the wall.

Auto-generated from the video audio.