Quick & Easy T3 RO Water Filter Replacement! #waterfiltration #water #diy

Just keep turning, it's going to release it. We turn this on, hear that beep, can see that there is a red light right there. It is time to change the CF filter. This is for the Waterdrop T3 RO remineralizing system. Here is a whole year's supply worth of filters. They're going to give you two CF, these are the carbon filters, the pre-filters, the remineralization filter, also the membrane filter. These CF filters right here, they last about 6 months or so many thousands of gallons of water. What I love about this filter setup is it's going to start beeping and it's going to tell you which filter needs replaced. All right, I like having separate shutoff valves for different things underneath my sink. Don't mind our dishes. That shut the water off, grab that CF, turn it to the left, it's going to release it, boom. You want to make sure that that the labeling faces the front. We'll turn our water back on slowly. Hold this down for 7 seconds. We're going to let that run right there for 15 minutes and we're going to be good to rock and roll. And if you forget all those steps, they're right there on the filter. If you want to check out a full installation video, I'll put it in the comments section.