Skip to main content
Stesso

Diagnose Problem and Disassemble Hose Bib Handle and Stem

0:02
1:16
5.8K views

At 0:02 in

Water Won’t Come Out! 💦 #plumbing #plumber #diy

Watch on YouTube

What happens here

Begin by identifying the problem: a Woodford Brass Model 17 frost-free hose bib that is not opening or closing. The initial plan involves using a Woodford Brass Model 17 repair kit (RK-17MA/RK-17MH). Attempt to remove the handle screw using various screwdrivers. If the screw is corroded, apply a penetrating oil like PB Blaster to help loosen it. If standard methods fail, use a multi-tool to cut or break the corroded handle or its screw to gain access to the stem. Once the handle is off, use an adjustable wrench to remove the stem from the hose bib body. Upon inspection, it's discovered that the check valve has completely separated from the stem, rendering the basic repair kit insufficient.

Goal: Access and inspect the internal components of the hose bib.

Tools and materials

  • Adjustable Wrench — Removing the stem from the hose bib body
  • Multi-Tool — Cutting off the corroded handle or screw if other methods fail
  • PB Blaster Penetrating Catalyst Blaster — Loosening corroded screws and parts
  • Screwdrivers — Attempting to remove the handle screw
  • Woodford Brass Model 17 Repair Kit — Initial attempt at repair, later deemed insufficient

What they say

Hide

have a Woodford Brass model 17 frost-free hose bib that does not open or close. So, I went to the store and I got an RK-17MA Woodford Brass model 17 repair kit. And it would have been a great option if the handle was not corroded to the stem. Tried several different screwdrivers and some PB Blaster, but I ended up having to pull out a multi-tool. Once I finally got this apart, I found out that the check valve was completely off the stem. The repair kit wasn't going to help

Auto-generated from the video audio.