Skip to main content
Stesso

Heat the PVC Conduit Until Pliable

0:25
1:13
18.9K views

At 0:25 in

Using Just a Heat Gun and a Slinky to Bend 3” PVC Conduit, Would you do this? #electrician

Watch on YouTube

What happens here

With the bending spring inside, use the heat gun to apply heat to the specific section of the PVC conduit where the bend is desired. It is crucial to keep the heat gun in constant motion, moving it back and forth and rotating the pipe to ensure even heat distribution around the entire circumference. Continue heating until the PVC becomes noticeably pliable and flexible, resembling cooked pasta, but avoid scorching or burning the material. Smoke or a slight change in color can indicate that it's getting hot enough.

Goal: Make the PVC conduit soft and flexible enough for bending without damaging it.

Tools and materials

  • Gloves — To protect hands from the hot pipe
  • Heat Gun — To apply heat to the PVC conduit
  • PVC Conduit — The material being heated
  • Safety Glasses — Eye protection from heat and fumes
  • Work surface/Pipe Supports — To stabilize the pipe during heating

What they say

Hide

>> Yeah. I'm heating the whole surrounding of it. Right. >> If that spring wasn't in there, it hasn't would have a chance to >> Yeah. Because there's nothing holding it up inside. Right. The spring is holding it up inside. >> Yeah. >> You can bend this. says, "Put it over your knee and bend it." This is rated for 3 in. And here we have a stick of 3 in. Is this schedule 40? Schedule 40. >> You're telling me you can bend this by hand? >> Yeah. With that? >> Yep.

Auto-generated from the video audio.