Introducing Pad Savers and Auxiliary Interface Pads

everything we've got a pad saver and right here so inside the kit you have a pad saver if you're on your sander you can put this on your sander then your abrasive attached to that so you don't damage the hook and loop on your sander if you're burning through your abrasives like your paper braces and stuff this could save your um hook and loop from getting um i'm getting damaged to it we've got interface pads right here we've got a open cell interface pad we've got a closed cell interface pad you can hook this to the hook and loop part of your sander and i'll show you that when i open up the sander and this will you can take flat abrasives either paper or film tech attach it to the hook and loop and now you can turn a flat abrasive into a basically a five millimeter or ten millimeter um sponged abrasive that will contour to edges now here's another box we've got um ekka silk half inch um sponges and all these um abrasives also have holes for vacuums so you can attach it to your vacuum so you're doing dust free sanding now we've got a box of uh super fine looks like we got fine super fine and what else is in here very fine um open cell half inch sponges these are absolutely amazing to do contouring to any rounded edge routed edge just about every single door you're going to run into cabinet door you're going to have some type of contoured a routed edge and these things just contour to those edges and make it so you don't have to do any manual hand