Analyze Data and Increase Boost

like my estimation and draggy and lots of experience running the truck it's pretty much really close so what are you gonna put in it now um basically i'm just gonna go straight to double so i'm gonna just pin the three-port mac at whatever it makes so like probably high teens 17 18 you see do it whatever it makes it makes if it dies he dies so you laugh but i literally said that about five times in my last race because i drew a really really fast guy at the snow prep and i had no clue what i was going to do to beat him other than go as fast as i could so like i swapped some things around and i basically turned my freeport mac valve into a check valve so the wastegate has a top and bottom port while i pulled the bottom port so there was nothing to helping the gate open and then i plumbed the top port directly to the dome so all the boost was going through the dome nothing was helping it open and it made like 30 pounds on the trans brake so like i moved about that far my map sensor was pinned it was maxed out it's pretty much a hundred percent through all the places that's a throttle position an rpm graph and that's duty cycle to the mac valve so it's 100 basically everywhere 100 percent it give it one hundred hundred it's about to start raining we gotta get this rip in we're gonna hold up in the rain i'm gonna leave the rest of the rain we gotta descend and turn in the rain