Skip to main content

Structural Assessment & Initial Demolition

11:50
18:43
354.8K views

At 11:50 in

Transforming Abandoned Garage Into My Dream Shop (EP.2)

What happens here

The host walks through the now mostly empty garage, pointing out major structural flaws. He highlights a significantly sagging roof, areas of rot near the electrical breaker box, and incorrectly framed walls (e.g., vertical planks with significant flex). He concludes that three of the four walls and the roof are in terrible shape. He then begins to dismantle one of the built-in workbenches using a hammer and a pry bar, exposing more of the underlying wall structure. He also notes a broken hammer during this process.

Goal: The host conducts a closer inspection of the garage's structural integrity, identifying severe rot, sagging joists, and improperly constructed walls, then begins dismantling existing workbenches.

Tools and materials

  • Hammer
  • Pry Bar

What they say

Hide

[Music] let me give you kids a lesson on putting up walls studs they don't go this way they go this way look at all this Flex that's not good [Music] broke my hammer this is the only thing that's dividing the wall from here to the garage some wainscoting thank you no freaking way oh and that's cardboard by the way what is this this is like there's no header and that piece is Rodney off I'm really surprised nothing's falling down there's essentially a curtain expensive curtain [Music] so I think this used to be the exterior wall and then they cut it off and then they just created out of scraps the back portion of it it can't get worse than this it honestly cannot get worse than this in order everything's falling apart ceiling joists are bowing down and the supports I mean these are one by sixes I mean that's not holding anything up the roof is legitimately caving in and that section is completely rotting out I don't know if I'll be able to safely bring my tools in here I don't know how long the structure will last this is where my new shop would be can you believe this [Music] I'm really nervous about tearing down any walls especially even though this is doesn't seem like it's holding much well this one kind of is I think that's load bearing inappropriately set up but load bearing so until I figure out how to get a reinforcements in here that section is going to stay there because those ceiling trusses are on there let's break down this workbench foreign [Music]

Auto-generated from the video audio.