Skip to main content

Addressing Structural Instability

13:02
18:43
354.8K views

At 13:02 in

Transforming Abandoned Garage Into My Dream Shop (EP.2)

What happens here

Having removed the interior partitions, the creator assesses the remaining exposed structure. He points out that the ceiling joists are severely bowing and are only supported by flimsy 1x6 lumber, which is inadequate. He also notes that much of the remaining framing appears to be non-load-bearing and haphazardly constructed. The creator expresses serious concerns about the safety and stability of the entire garage structure, questioning whether it's safe to even bring his tools into the space. He halts further demolition of potentially load-bearing elements until a plan for structural reinforcement can be devised, emphasizing the need to address these foundational issues before any shop build-out or modular system installation.

Goal: After initial demolition, the creator critically re-evaluates the severe structural deficiencies, particularly the compromised ceiling joists and unsupported walls, pausing further demolition until proper reinforcement strategies can be developed.

What they say

Hide

down there's essentially a curtain expensive curtain [Music] so I think this used to be the exterior wall and then they cut it off and then they just created out of scraps the back portion of it it can't get worse than this it honestly cannot get worse than this in order everything's falling apart ceiling joists are bowing down and the supports I mean these are one by sixes I mean that's not holding anything up the roof is legitimately caving in and that section is completely rotting out I don't know if I'll be able to safely bring my tools in here I don't know how long the structure will last this is where my new shop would be can you believe this [Music] I'm really nervous about tearing down any walls especially even though this is doesn't seem like it's holding much well this one kind of is I think that's load bearing inappropriately set up but load bearing so until I figure out how to get a reinforcements in here that section is going to stay there because those ceiling trusses are on there let's break down this workbench foreign [Music] [Applause] [Music] all right I crunched the numbers this post and this post are supporting this makeshift ceiling joist but this wall that's clearly not even standing the right way is doing nothing but keeping this little ledge up for uh storage so I think we could safely remove it oh boy uh just one I thought this project couldn't get more stressful I just got not one but two Nails in the dump trailer and it's got weight in it right now so I'm rushing to O'Reilly's right now try to pick up a tire patch kit so this tight so this trailer tire doesn't lose too much air because it's already getting filled up and that's gonna be a lot more difficult to fill up with a tiny little plug-in accessory air pump so let's see what we can do so here's one culprit right there uh this was another one I pulled it out and I was bleeding way too much air obviously so to slow it down a hair I put a drill bit in there so hopefully we can get this puppy recovered quickly oh that was some NASCAR work right there didn't lose too much air in the tire so which is good let's get back to work [Music] thank you [Music] [Applause] foreign [Music] [Applause] [Music] supporting whatever this is doing which I don't think anything the bottom Plate's not even anchored to the concrete not even anchored why I don't know [Music] whoa [Music] talk about an open concept huh Fixer-Upper ain't got nothing on me well that's as far as we'll get for today uh we…

Auto-generated from the video audio.