Skip to main content
Stesso

Fabricate and Weld Support Braces

0:25
1:02
8K views

At 0:25 in

Trailer extension!

Watch on YouTube

What happens here

Once the main beams are in place, measure and cut shorter pieces of steel stock to serve as support braces. These braces will be welded between the main extension beams and the existing trailer frame to prevent movement (back and forth) when weight is applied to the extension. Use a speed square to ensure the braces are positioned at 90-degree angles for optimal support. Clamp them into place and then weld them securely.

Goal: Reinforce the trailer extension for stability and load-bearing.

Tools and materials

  • Angle Grinder Milwaukee M18 Fuel — Finishing welds or making minor adjustments
  • Clamps Pittsburg — Holding braces in place
  • MIG Welder ArcCaptain MIG 250 — Welding the support braces
  • Speed Square — Ensuring square angles for the supports
  • Steel Stock — Creating the support braces for the extension
  • Welding Helmet — Eye and face protection

What they say

Hide

Got some supports cut. I'm going to throw some welds around here. That'll keep this from going back and forth when I got weight on this trailer hitch here, so.

Auto-generated from the video audio.