Skip to main content
Stesso

Connect Hose Whip to Main Hose and Seal

5:10
9:24
31.5K views

At 5:10 in

Titan ControlMax Conversion HACK!. What Can and Can't You Use.

Watch on YouTube

What happens here

With the hose whip now attached to the spray gun, connect the other end of the hose whip to the main sprayer hose. This involves using the remaining two fittings from the Paint Life Supply Co. ControlMax Conversion Kit. These fittings will bridge the connection between the standard end of the hose whip and the proprietary end of the main ControlMax hose, completing the adapted hose setup. Once these are hand-tightened, apply Teflon tape to all threaded connections to ensure a watertight and leak-free seal. Then, use wrenches to tighten all fittings securely, preventing any pressure loss during operation.

Goal: Connect the hose whip to the main sprayer hose using the remaining conversion fittings, then apply Teflon tape and tighten all connections for a leak-free seal.

Tools and materials

  • Teflon Tape
  • Titan ControlMax HEA Main Hose
  • Wrenches

What they say

Hide

so this is all attached now there's your fittings there now my other fittings i've got my control max conversion kit with these two fittings right here these fittings are screwed on right here together these screw together this is going to screw on right here now this is going to screw onto my hose now my hose and gun are adapted to work together now i have a much more flexible gun set up right here now before you attach and hook these up permanently you want to use teflon tape on these fittings and you want to tighten them up snug them up very tight with teflon tape so

Auto-generated from the video audio.