Skip to main content
Stesso

Final Connections and System Check

0:29
1:01
9.9K views

At 0:29 in

This Customer got a CyberTruck, and needed a Charger ASAP. What do you rate this install? #ev

Watch on YouTube

What happens here

After the installation is complete, the electrician showcases the finished work. The Tesla Wall Connector is neatly mounted on the wall, with its cable coiled. A finger points to the electrical panel, indicating that a new 50 Amp breaker has been installed to supply power to the charger. The wiring, specifically 6-gauge THHN wire, is shown running from the breaker through a 3/4-inch EMT (Electrical Metallic Tubing) conduit, which leads directly to the Wall Connector. The Wall Connector has an illuminated green light, confirming it is powered and ready for use.

Goal: Complete electrical connections and verify functionality

Tools and materials

  • 50 Amp Breaker Unspecified — Providing overcurrent protection for the charging circuit
  • Electrical Service Panel Unspecified — Housing the new breaker and connections
  • EMT Conduit — Protecting and routing the electrical wires
  • Tesla Wall Connector Unit Tesla — The installed charging unit
  • THHN Wire — Conducting electricity from the breaker to the charger

What they say

Hide

looks like all right guys Tesla wall connector is finally installed for the Cyber truck here's what we did guys we put it in a 50 amp breaker and we got our THHN wire six gauge going into 3/4 in EMT call us if you need an EV charger installed fast Professional Service we'll come to your home and we'll get your charge installed

Auto-generated from the video audio.