Clean Walls and Install Capstone

What happens here

Once all courses of the textured wall blocks are laid, use a whisk broom or a stiff brush to thoroughly clean off any dust, debris, or excess material from the top surface of the final course. This ensures a clean bonding surface for the capstone. Then, carefully dry-fit the capstone to ensure it sits properly and is centered. Apply a generous bead of construction adhesive along the top perimeter of the final course of wall blocks. Gently lower the capstone into place, aligning it as accurately as possible. Use the rubber mallet to tap the capstone lightly, ensuring full contact with the adhesive and a level finish.

Goal: Securely attach the capstone to complete the fire pit structure.