Consider Longer Wire-Braided Whips for Advanced Use

up so now we have the next uh hose whip right here and this is our exit flex hose whip that is a little bit different than this hose in itself um and because i didn't want banding on the gun ends right here because i wanted it to act and be flexible like a whip without the banning you do sacrifice a little bit of durability at the crimp point right here but once again i wanted it to act more like a a whip itself and i did want to have it 25 feet because i wanted to be able to use less product to load it up it has the banning it's really important to have banding at the pump side right here because that's where there's going to be you know maybe some pulling and tugging and stuff and you want that durability right there on the um the pump in so there is banding on the pump in this hose once again is rated at 5000 psi it's actually 5070 psi and the inside diameter of this is actually 4.8 which is a little bit different than uh this hose in itself this one right here is 3.2 so you can actually handle a little bit heavier coatings with this than you can with just the whip itself once again i've asked i've had people ask me can i put a whip on the end of my hose whips themselves you do not want to do that i've done a bunch of testing with it and i've used it myself with a bunch of coatings it worked but with some coatings we were having pressure related issues and spitting so the gun would spit quite often when we attached a whip because i wanted to have this hose and then have an exit flex whip attached to this right here so i can have it even more flexible and that kind of caused some pressure related issues so if you're running this hose do not run a whip you know on the end of that hose all right i'm going to