Understand Standard Vacuum Table Operation

0:03

1:16

4K views

At 0:03 in

The perfect inspection table for cabinet doors! #innovation #new #newtools #tools #toolsofthetrade

Watch on YouTube

What happens here

Begin by understanding the basic components of the Airwaves vacuum system. The system consists of a 24-inch by 24-inch vacuum table connected to a 5 CFM pump via an 8 mm hose. On top of the vacuum table is a 1/4 inch MDF spoil board. When the vacuum pump is turned on, air is pulled directly through this porous MDF spoil board. The video demonstrates that placing a small, light object, like a clear acrylic disc, directly onto this spoil board will not result in a secure hold because the air is pulled universally through the entire surface, preventing a strong vacuum seal on the small object. This setup is typically used as a sanding station or a platform for holding small parts.

Goal: Understand how a basic vacuum table functions and its limitation with small parts.

Tools and materials

1/4 inch MDF Spoil Board — The disposable top layer of the vacuum table
5 CFM Pump — Providing vacuum pressure to the table
8 mm Hose — Connecting the vacuum pump to the table
Airwaves Vacuum System Airwaves — The core vacuum clamping setup
Small Clear Acrylic Disc — Demonstrating the lack of hold on a standard spoil board
Vacuum Table Airwaves — The primary work surface for vacuum clamping

What they say

(465 characters)

Hide

Here we have our airwaves vacuum system. This is a 24-in x 24 in vacuum table with a 5 CFM pump plumbed in from the side using an 8 mm uh hose system. We've got a/4in spoil board here. This would be kind of your sanding station or your platform that you would use to cut small parts or hold small parts. We're going to turn the vacuum pump on. We're pulling air directly through this MDF spoil board here. When you go to prep your surfaces, small parts aren't going

Auto-generated from the video audio.