Join and Secure with Screws
0:09
0:25
3.2K views
At 0:09 in
The internet: 🗣️But those miters are going to move!! Us: Nah… #build #builder #carpentry #miter
What happens here
Carefully bring the two mitered composite boards together, aligning their edges precisely to form a perfect 90-degree corner. The adhesive applied in the previous step will start to set, helping to hold the pieces in place. Once aligned, insert gold-colored pocket hole screws into each of the pre-drilled pocket holes. Use an impact driver to drive the screws firmly and flush with the surface of the pocket hole. Ensure the joint remains tight and flush as you drive each screw, creating a strong and seamless corner assembly.
Goal: Assemble and permanently secure the corner trim piece.
Tools and materials
- Assembled Composite Boards — The two pieces being joined to form the corner trim
- Impact Driver Makita — Driving the pocket hole screws efficiently and securely
- Pocket Hole Screws Kreg — Mechanically fastening the two composite pieces together