Wiring Harness Installation

plow where you got the wings back and you're trying to take the the plow off the truck almost got me saying it out plow to you we call them Kit stands so it keeps the wings up so you can pull in and out and let's go see your wiring harness okay what is this one now so that connects to your uh battery side on your breaker and then this connects to your uh line side on your breaker there's your power and this connects to your negative on your battery then right to your bumper that's it that's it that's it so that's what happens when we go in and we eat lunch they already got the wiring done okay so here's the heavy power here's the wiring that's legitimately ran right down right up and through mhm it comes right to here and here's power positive here's your jumper yep to to our battery right there here's our reset button exactly right okay so we got a reset here our negative is hooked up to the negative terminal on the uh battery on the battery and then we got to go through the firewall oh you you can follow Philly you already went through the firewall yeah I followed the same hole that but I used yeah okay so we went right straight through the firewall right into there yeah it's already plugged in your controller is already in plugged in everything that is a really easy here runs out right here controller's right there and that's it that's it that's the wiring yeah that's it if you can hook a positive up and a negative up and fish a wire through the firewall without burning it on your manifold yep you're good to go exactly okay there's something that I really want to point out to you guys now before we could install the new F12 we had to remove the