Skip to main content
Stesso

Adjust Blade Height

0:21
1:51
19K views

At 0:21 in

Table saw how to

Watch on YouTube

What happens here

Adjust the height of the saw blade using the control lever, typically located on the front or side of the table saw. For optimal safety and cutting performance, the blade should be set so that it protrudes approximately 1/8 to 1/4 inch above the top surface of your wood workpiece. This minimizes the exposed blade surface while ensuring a clean cut.

Goal: Set the saw blade to the correct height for safe and efficient cutting.

Tools and materials

  • Table Saw RIDGID — The tool whose blade height is being adjusted
  • Wood Workpiece — To gauge the correct blade height

What they say

Hide

cut you're going to be doing. Are you going to be doing a rip cut where you go with the grain or a cross cut where you go against the grain? You want to set the height of your blade. So, mine is controlled down here by this lever. And you only want this blade about an inch or a quarter above your work piece. So, right about there. And when you're ripping with the table saw, make sure that you use the fence and measure correctly. So, to measure,

Auto-generated from the video audio.