Hang and Latch the Gate
At 6:45 in
Suzie Cow is so spoiled! Moving the cows to new pasture...ALONE!
What happens here
The gate has adjustable hinge hangers. Use an impact driver with a 9/16 inch socket to loosen the nuts on these hangers, allowing them to slide up or down the gate frame. Carefully lift the gate and slide the hinge hangers over the installed lag bolts. Once the gate is hanging, adjust its position to ensure it's level and swings freely without dragging on the ground. Use the impact driver to tighten the hinge hanger nuts securely, locking the gate into its desired position. Finally, use the attached chain to secure the gate to the opposite gate post by wrapping it around and hooking it into the gate's latching mechanism.
Goal: Mount the gate and secure it with an adjustable latch.
Tools and materials
- 9/16 inch Socket — Used with the impact driver to adjust hinges
- Gate Chain — Securing the gate to the post
- Gate Post — The post for latching the gate
- Impact Driver DeWalt — Loosening and tightening hinge hanger nuts
- Lag Bolts — The pre-installed hinge points