Skip to main content
Stesso

Design and Rough Cut Cabinet Components

0:49
17:16
207.9K views

At 0:49 in

Surprised Her With Wine Cellar, While She's Out Of Town.

Watch on YouTube

What happens here

With the old bookshelf removed, the creator lays out the design for the new base cabinet, which will measure 21 inches wide, 13 inches deep, and 34.5 inches tall, designed to match standard kitchen cabinet dimensions. He uses a Kreg track saw to efficiently cut a large sheet of plywood into smaller, more manageable sections for the main cabinet components. These rough-cut pieces are then moved to a table saw for precise final cuts, ensuring accuracy for the cabinet's sides, top, and bottom panels.

Goal: Prepare precise plywood pieces for the cabinet carcass.

Tools and materials

  • Kreg Track Saw Kreg — Making initial straight and accurate cuts on large plywood sheets
  • Pencil — Marking cut lines on plywood
  • Safety Glasses — Protecting eyes from sawdust and debris
  • Table Saw — Making final precise cuts for cabinet components
  • Tape Measure — Accurate measurement of all panel dimensions
  • Plywood Sheet — Main construction material for the cabinet panels

What they say

Hide

All right, so here's the vision. I'm thinking we build a cabinet that will match the kitchen cabinets, a door in it, a giant, and I mean giant seller all the way to the ceiling and we have to make it aesthetically appealing. So I mean it has to have a pattern. We're also looks like storage and I don't think she'll be happy and here's the funny part. We've never actually discussed whether or not she even wants a wine bar or a wine seller. Let's start working on the cabinet. And this is gonna be probably the smallest cabinet I've ever built. It's gonna be only 21 inches wide, 13 inches deep, and 34 and a half inches tall, which is your typical standard cabinets for the kitchen. So to hit right into the nook and half a couple of filler pieces on the side, let's break the big piece down here. Do all of our final cuts on our table saw and start assembling this thing.

Auto-generated from the video audio.