Fabricate Concrete Countertop Mold

here we go okay so we have to prepare our mold box there's a couple of steps to it step one we're gonna take some acetone clean up and degrease basically anything inside of it step two we're gonna take any kind of wax really this is just a car wax and put a light coat all the way around and the reason that's gonna be for it is for step three when we take our silicone 100 silicone and we line all the edges beveling them with a caulking tool and like that and then obviously after it's pressed in the wax is going to allow for us to help take the outer edges that are smeared off to create a nice clean beveled edge mold so the concrete doesn't cut our fingers okay so while this is drying i marked out my holes because we need to create these little barricades or separation so the concrete doesn't go [Music]