Connect Solar Panel, Attach Camera, and Antenna

What happens here

Take the camera unit and plug the solar panel's charging cable into the charging port on the back of the camera. The charging port is usually protected by a rubber stopper; make sure to seal it properly after plugging in to prevent moisture intrusion. Once plugged in, the camera should show a green light, indicating it's receiving power. Screw the camera firmly onto its mounting bracket on the wooden board. Then, screw the cellular antenna into its designated port on the camera. Use a multi-tool or pliers to gently snug up the antenna for a secure connection.

Goal: Finalize the assembly of the camera and solar panel on the wooden pod.