Skip to main content
Stesso

Introduction and Project Overview

0:00
3:26
122.4K views

At 0:00 in

Staining & Re-lacquering Interior Woodwork. Using Wood Stains.

Watch on YouTube

What happens here

The video introduces the project to restain and lacquer interior trim work that has accumulated nicks and dings over time. The presenter outlines the materials and general process: cleaning with Jasco TSP Substitute, lightly sanding with a 3M sanding sponge, applying Sherwin Williams BAC wiping stain (which dries in about an hour), and finishing with Sherwin Williams moisture-resistant Sherwood Lacquer (medium rub effect). The overall goal is to make 20-year-old trim look brand new again.

Goal: Understand the project scope and materials needed for restaining and lacquering interior trim.

Tools and materials

  • 3M Sanding Sponge 3M — Lightly sanding nicks and dings on the trim
  • Jasco TSP Substitute Jasco — Cleaning and deglossing the trim

What they say

Hide

the IDO painter. In this video, we're going to show you how we go about restaining and lacquering some interior trim work we have here. And it's got some nicks and dings on it. And we're going to go around and we're going to actually clean all this trim first with a Jasco TSB substitute. Then any nicks and dings that need to be lightly sanded, we're going to be using a 3M sanding sponge and just lightly sanding those nicks and dings. And then after that, we're going to be staining it with a Sher Williams BAC wiping stain that dries in about an hour. And then we're going to be going back and lacquering it all with a moisture resistant Sherwin's lacquer. And it's a medium rubber effect lacquer. And once we're all done, this trim will

Auto-generated from the video audio.