Skip to main content
Stesso

Sprayer Setup and Pressure Adjustment

1:47
20:40
10.6K views

At 1:47 in

Stain A Fence FAST. Fence Painting from A to Z.

Watch on YouTube

What happens here

Set up the airless sprayer by placing the intake hose into the stain bucket. The initial pressure might be too high (over 2000 PSI), so it's important to significantly lower it. The goal is not a fine finish, but rather controlled application to minimize overspray. The video demonstrates turning the pressure down and testing the spray pattern on the fence to achieve the desired low pressure.

Goal: Prepare the airless sprayer for stain application at low pressure to control overspray.

Tools and materials

  • 310 Tip — Controlling the spray pattern
  • Airless Sprayer Titan 440i — Applying the stain
  • Gloves — Protecting hands from stain
  • Respirator RZ Respirator — Protecting lungs from inhaled spray particles
  • Safety Glasses — Protecting eyes from stain particles
  • Stain Bucket — Holding the wood stain for the sprayer intake
  • Woodscapes Solid Color Stain Woodscapes — Being applied through the sprayer

What they say

Hide

set up and ready to go here so got the sprayer set up it's over 2000 psi i'm gonna definitely lower the pressures down significantly make sure i got a seat inside there it's again i got a 310 tip it doesn't matter you best to probably not use a new tip on something like this because you don't need a fine finish you just want to control overspray so like a blown out 310 is not a bad thing it's going to turn my pressure down way down it's looking good right there i've got a stain brush i'm just going to be using a block stain brush got a wooster bravo stainer here i'll be using today to do the staining or actually the back brushing now this is your critical part and the stain process is to actually back brush your stain if you don't back brush it your fence it's not going to last very

Auto-generated from the video audio.