Acquire and Cut Aluminum Angle

is made all right here we go it's a piece of angle iron right here you can go down just to your local hardware store buy a piece of angle iron it comes in a lot of different links now this angle iron this is a one inch angle iron so it's an inch on both sides so get a piece of angle iron you really only need 11 inches cut this thing to 11 inches and then we're going to drill in our pilot holes right here which is going to guide our 3 32 inch bit so we got our angle iron we also put on our angle iron we've got felt and this felt right here you can use it it's basically like what you put on the bottom of furniture to slide around on floors and stuff and it's got a self-adhesive back on it and that uh that um felt itself that is just a quarter inch felt it's tacked on there so we've got our angle iron we've got our felt so it won't scratch or mark our door we're actually going to be painting the door but you just don't want it to mark or scratch the door that's going to show so and it also just makes a soft landing for your template to sit on the top of the door to do your pilot holes now your pilot holes these are 7 64 holes that are drilled into your aluminum template right here and they're set in a quarter inch so they're