Skip to main content
Stesso

Prime the Airless Sprayer with Water

1:28
10:42
157.4K views

At 1:28 in

Spray Trim Like a PRO! Airless Sprayer Crash Course

Watch on YouTube

What happens here

With the sprayer set up, place the intake tube into a bucket of clean water. Turn the sprayer's on/off button to the 'on' position and adjust the pressure dial to a low setting. Direct the prime hose back into the water bucket. The sprayer will begin to suck up water through the intake tube and expel it through the prime hose, effectively purging any antifreeze or air from the system. Continue this until clean water flows consistently from the prime hose.

Goal: Before introducing paint, prime the airless sprayer with clean water to flush out any residual antifreeze or debris, ensuring a clean start to the paint application process.

Tools and materials

  • Bucket
  • Titan 440 Impact Airless Sprayer
  • Clean Water N/A

What they say

Hide

come out of it one of them this is a prime hose this is what purges all the air out of an airless sprayer because it is what it says is it's Airness the only thing that comes out of the hose right here is paint it's not mixed with air at all it's it's an airless sprayer this will prime and purge everything all the air out of the system this is the intake tube right here this is what goes into our paint this is gonna suck the paint up take it into the airless sprayer send it out to the hose and we'll be able to spray our paint with it so the first thing we do I'm gonna get some clean water in here I'm just gonna turn this thing on I'm gonna run some clean water through it first because it has antifreeze in it and then we'll go from there has an on/off button right here and then it has a pressure button right here this is going to adjust the pressure so I can turn it on and you can see it's gonna start sucking paint up through the intake tube and sending it out the prime - so now I got this water so the orange

Auto-generated from the video audio.