Skip to main content
Stesso

Adjust Pressure and Purge Air from Hose

4:10
10:42
157.4K views

At 4:10 in

Spray Trim Like a PRO! Airless Sprayer Crash Course

Watch on YouTube

What happens here

Increase the pressure on the airless sprayer to approximately 2000 PSI, which is ideal for spraying trim. With the spray tip directed into a waste bucket, pull the trigger on the spray gun to flush any remaining water from the hose until only pure paint is emitted. This ensures a consistent paint flow and prevents water droplets from mixing with your paint on the surface. Ensure proper ventilation and wear a respirator and safety goggles during this step and all subsequent spraying.

Goal: Increase the sprayer's pressure to the appropriate level for fine finishing and then purge any remaining water or air from the main spray hose until only pure paint is flowing.

Tools and materials

  • Airless Spray Gun
  • Respirator Mask
  • Safety Goggles
  • Titan 440 Impact Airless Sprayer
  • Waste Bucket

What they say

Hide

and now it's in the spray mode I can turn my pressure up I typically spray my trim around 200 psi and I know this is probably a complicated process but I got all kinds of videos explaining how to use airless sprayer so this is it gonna be good enough just this one time but it's ready to go now what I want to do make sure all my fittings are ready to go my pressure is set I'm gonna be spraying in about 2000 psi so I'm going to turn that up till it reaches 2000 about 2000 psi I'm gonna run all the water because I got my line right here there's water in the line or don't run all the water out of a line until I just get paid so I got my gun all set up I always like use an extension so I don't have to bend over or reach so I typically have like a six inch to 10 inch gun extension on there got my 3/10 tip it's all set up my pressure looks pretty pretty good right there if we're gonna begin spraying we want to lay out our drop cloths make sure our drop cloths are all around we're gonna be spraying and then we'll start spraying so let's set up those drop cloths one final check to make sure we're not gonna get any overspray on the floor or anything we want to make sure we have our respirators and our I I wear protective eyewear on and then we'll get going I took the extension off because it was

Auto-generated from the video audio.