Skip to main content
Stesso

Introduction and Component Overview

0:05
8:10
122.7K views

At 0:05 in

Spray Booth Ventilation System? How to set up a Ventilation System for a Mobile Jobsite Paint Booth.

Watch on YouTube

What happens here

The video begins with the presenter introducing the spray booth and its components. The primary goal is to set up a blower system that ventilates the booth, drawing overspray and fallout to the back and preventing it from escaping the front. The presenter advises on inserting the components that hold the ventilation system in place before fully tightening the booth's corners, as it can be difficult to slide them in later if the frame is too tight. He then demonstrates loosening and removing wing nuts from these components.

Goal: Understand the purpose of the ventilation system and its initial mounting components.

Tools and materials

  • Jobsite Spray Booth The PaintLine — The primary structure being ventilated
  • Ventilation Mounts The PaintLine
  • Wing Nuts — Securing the ventilation mounts to the spray booth frame

What they say

Hide

all right we got our spray booth uh set up i did flip it around because i want to show you how to hook up this blower system and i couldn't get the cameras in and video on the other side the spray booth just spins around really easily and so we spun around just for video purposes now here's our um items that go along with the blower system that keeps this this spray booth ventilated and keeps sucking you know our um fallout and overspray to the back side of the booth and not going out the front of the booth it has um these devices right here this is what's gonna hold this thing in place you definitely want to slip these things in before you do your corners um and tighten them down uh i didn't do it first i just loosened it and slipped it in now so you can have them in you know beforehand if the corner if that's really tight it might be a little bit hard to get them in later on if you are going to um hook up your blower system you know make sure you toss these things in before you lock your corners down now there's two holes on the bottom of it these uh wing nuts right here you're just going to remove the wing nuts and this is what's going to hold this system in place right here so i'm loosening these wing nuts

Auto-generated from the video audio.