Skip to main content
Stesso

Cut Plastic for Airflow

3:08
8:10
122.7K views

At 3:08 in

Spray Booth Ventilation System? How to set up a Ventilation System for a Mobile Jobsite Paint Booth.

Watch on YouTube

What happens here

Before connecting the blower system, use a utility knife to cut away the plastic sheeting from the spray booth where the ventilation mount is located. This creates an opening for airflow. Ensure to cut precisely along the orange frame of the ventilation mount to avoid leakage and ensure a tight seal once the system is fully installed. This will allow air to be drawn through the filter.

Goal: Create an opening in the spray booth's plastic sheeting for the ventilation system.

Tools and materials

  • Utility Knife — Cutting the plastic sheeting
  • Ventilation Mount The PaintLine — Serving as a guide for cutting the plastic

What they say

Hide

so i can get air flow through there got my whole cut right there large enough i like to just trim the excess plastic away so i'm not restricting any airflow i don't want to cut outside my orange right there so you'll get some leakage it does have a seal around it a black seal so you get your nice tight seal when it's held in place magnetically once again feet are going to go down it's going to lock itself right in place extremely strong magnets now it's held in place

Auto-generated from the video audio.