Install Schluter Shower Pan and Curb

this is a system for the shower pan it's got multiple components in it the waterproofing membrane the the what do they call it the the the sidewalk or the the ledge and then this is the pan that slopes in i'm gonna cut it aside and start using uh unmodified thinset to put it in place so far i spent about maybe 15 bucks on the drywall and screws uh the kit right here was expensive it was like 522 bucks so i can cut this curb and everything to size i'm just nervous because it's expensive i'm gonna see if i can get this whole shower done in maybe 1500 bucks i have a good feeling about it but we'll see what happens uh of all the problems this is going to be the most annoying one i did my research i did this right the wrong thing i did is the diameter of this look at this that should be sitting flush on the ground i didn't measure that this is four inches and so that there's two options i can either a build up a platform which is an inch and a half i can make that happen or option b i could take an angle grinder and just cut a square around this and that will give enough clearance option b is messier and i don't want to build a platform um damn you live and you learn man live and [Music] learn [Music] the idea is uh you first want to use the cement and the primer to glue on the drain first so we're gonna take the thinset mortar with a quarter inch trowel place the thin set underneath it place a thin set on this and then smack it underneath it and then we could put our schluter pan over that [Music] all right we trimmed it off how we needed it get a dry fit looks good um keep in mind your walls are not gonna be perfectly straight so we're gonna make it work [Applause] [Music] we have the moisture resistant drywall