Prepare Countertop for LED Panels

change of plans the sink is way too big to have surface area for LEDs around I bought four of these panels to go completely around and they really would only work if these were vessel sinks and because this is a kids bathroom a vessel sink is way too tall for the kids to get into that probably work in like the powder room so what we're going to do is we're going to focus on this section and that hopefully will illuminate somewhere further out I'm going to remove this piece right here possibly trimming it off on the sides and I'm going to put a/4 inch plywood underneath so that this will be recessed and these LEDs can go straight into them um I don't have a lot of room to play with it looks like I got about a/ an inch here so a/ qu inch will basically have to do but in the meantime look how massive these LEDs are they Giant okay change of plans that didn't work this piece completely came off so we're going to result back to using our Plywood And just sitting it down to allow the LEDs to stick out without getting in fear with the countertop and not interfering with the door