Skip to main content
Stesso

Install Breaker and Connect Circuit at Panel

0:56
1:11
15.7K views

At 0:56 in

Service Call, Repairing a 320 AMP Meter Socket, and Installing a GFCI Outlet In Basement, Thoughts?

Watch on YouTube

What happens here

The electrician connects the newly run 14/2 Romex cable to the main electrical panel. A new single-pole breaker (typically 15 Amp for 14 AWG wire) is installed. The black (hot) wire is connected to the breaker, the white (neutral) wire to the neutral bus bar, and the bare copper (ground) wire to the ground bus bar. This safely energizes the new circuit and makes the GFCI outlet functional.

Goal: Safely connect the new circuit to the main electrical panel.

Tools and materials

  • Screwdrivers Milwaukee — Connecting wires to the breaker and bus bars
  • Single-Pole Circuit Breaker Square D — Protecting the new circuit from overcurrent
  • Wire Strippers Klein Tools — Stripping insulation from cable ends for connection

What they say

Hide

outlets in a basement, guys, need to be GFCI protected. So, [music] I'm right now installing the outlet and as you can see, I ran a new circuit. Here is my single pole breaker and my hot wire, my neutral wire, my ground. I ran 14-2 Romex to the new outlet and boom, guys, it's all finished. Both jobs complete, customer satisfied and that's what a day looks like as an electrician.

Auto-generated from the video audio.