Skip to main content
Stesso

Test Fit and Install the Trim Piece

0:38
0:47
15.3K views

At 0:38 in

Scribing tips 👍 #carpenter #tools #homeimprovement #construction

Watch on YouTube

What happens here

Return the newly cut trim piece to its intended installation location to perform a test fit. The scribed and cut edge should now sit flush against the uneven wall or ceiling, eliminating any gaps. Make any final minor adjustments using fine-grit sandpaper if needed. Once you are satisfied with the fit, proceed to permanently install the crown piece using appropriate fasteners such as finish nails and/or construction adhesive, depending on the material and application.

Goal: Securely install the perfectly fitted trim piece with no gaps.

Tools and materials

  • Construction Adhesive — Providing additional hold for the trim piece
  • Fine-Grit Sandpaper — Making final, small adjustments to the cut edge
  • Finish Nails — Securing the trim piece to the wall or cabinet
  • Hammer — Driving finish nails for installation

What they say

Hide

That's a good mark to go off of to scribe, jigsaw, or use a sander. So, it works good for, you know, some of these spots you got a inch here, inch and a half up there. Ceiling's probably a half inch off. You know, you know what they say, if it ain't tight, it ain't right.

Auto-generated from the video audio.