Lubrication and Control Panel Details

me walking with the mill this is the controls for that debarker this turns on our blade this very simply widens the swath right here so we can open this all the way up to take a full 36 inches or we're milling smaller lumber and we want to get that tip as close to the board as we possibly can or the log as we possibly can you got to think the longer that blade the more chance of so we don't want it to wobble we want it to be straight this is the speed in which the mill drives this is up and down okay so this lifts the mill up and down there's a little computer at work here it's a very very simple computer this is called the wood miser simple set simple set very easy what we're going to be using it today we'll set it this is a manual setting and this is the simple set 1 and 1 16 that is how thick we are going to be cutting our boards today and you can see the up and down operation right here well evidently just down there we go cool these are the hydraulics this is all of our hydraulic controls for moving everything on this mill tipping the logs up rolling the logs and doing everything this makes this a one-man job versus a three-man job now without further ado we're gonna take our logox three-in-one forestry multi-tool and we're gonna roll this first log up on the mill and get busy [Music] contact [Music]