Apply Detailed Vertical Corner Trim
At 5:02 in
RIVERFRONT BACKYARD BUILD Pt 5 - Fixing Mistakes and Deck Details
What happens here
Enhance the deck's aesthetic by applying vertical corner trim to the skirt. Begin by using a track saw to make a precise vertical cut along the existing horizontal deck boards at the corner. The track saw is guided by a track that is temporarily screwed to the wall. After the cut, install a 5.5-inch composite deck board as the corner trim piece. This board is fitted against a 4.5-inch board (implied to be part of the horizontal decking being cut) with a deliberate 1/4-inch reveal, which effectively breaks up the horizontal pattern and adds visual interest. Finally, fill the pilot holes created by the track guide screws with specialized 'plug screws' to ensure a seamless and clean finish.
Goal: Create a clean, aesthetically pleasing vertical corner detail on the deck skirt using precise cuts and plug screws.
Tools and materials
- Composite Deck Boards — Creating the vertical corner trim pieces
- Cordless Drill — Attaching the track guide and driving plug screws
- Hammer — Light tapping of trim pieces or plugs into place
- Plug Screws — Concealing pilot holes left by track guide screws for a seamless finish
- Track Guide — Guiding the track saw for straight cuts
- Track Saw Makita — Making precise vertical cuts along the deck boards
- Screws — Temporarily attaching the track guide to the wall